GF 285 RoughMark is a 3.5 mil matte white opaque polymeric vinyl film coated with a solvent acrylic high-tack removable (HTR) pressure sensitive adhesive on a 90# layflat liner. GF 285s thick HTR adhesive is designed to aggressively grip onto textured substrates such as brick or block, yet cleanly remove without leaving adhesive residue on the contact surface. The 90# liner provides excellent dimensional stability for digital printing. GF 285 accepts a variety of solvent-based, eco-solvent, latex and *UV curable inks common to wide format digital printing systems.
GF 285-60
GF 285 RoughMark is a 3.5 mil matte white opaque polymeric vinyl film coated with a solvent acrylic high-tack removable (HTR) pressure sensitive adhesive on a 90# layflat liner
Technical Specification
Applications | Concept® 285 RoughMark™ can be used in applications where a conformable removable vinyl is desired. This film conforms well with controlled heat and features clean removability from a variety of moderately textured substrates including brick, block, and concrete surfaces (vertical application only). If a high gloss finish is desired, it is recommended to use Concept® 242 gloss clear cast laminate. NOTE: If applied to a painted surface the paint must bond tightly to the substrate. Test all applications prior to use. Not designed for coated/ sealed/ treated stainless steel, brass or bronze surfaces |
Thickness | Film: 3.5 mils. Adhesive: 1.8 to 2.1 mil. Liner: 6.5 mils. (Thickness variance +/- 10%) |
Temperature Ranges | Minimum application temperature: +40° F Service temperature range: -40°F to +200°F. |
Removablity | Removable up to 6 months for common substrates under normal exposure conditions. |
Adhesion | Stainless steel 16 Oz/ inch minimum PSTC-101 Method A Dwell is 24 hours at room temperature. |
Water Resistance | Excellent |
Humidity Resistance | Excellent |
Solvent Resistance | Good resistance to intermittent exposure from petroleum oils, grease, aliphatic hydrocarbons and gasoline. |
Storage Stability | One year shelf life stored at 70° F and 50% relative humidity. |
Recomendations | Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in vinyl degradation. * For UV Curable inks, please consult with the ink manufacturer for specifics on ink flexibility. |
Product Code | 285-54 54” x 150’ 285-5475 54” x 75’ 285-60 60” x 150’ 285-6075 60” x 75’ |
Additional information
Weight | 59 lbs |
---|---|
Dimensions | 63 × 7 × 7 in |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.