GF 232 is a 6.0 mil perforated high performance vinyl film with a white print side and a black see through side coated with a clear low tack repositionable removable solvent acrylic pressure sensitive adhesive designed for exterior/outside mounted one-way view-through window graphics. The vinyl will accept a variety of wide format digital printing inks including solvent, eco-solvent, UV and Latex. The dual layflat liner construction, perforated/solid liner, offers good dimensional stability in a variety of ambient conditions and is cross compatible with wide-format digital inkjet printer platforms including UV. The adhesive is designed to cleanly remove from glass with little to no adhesive residue.
GF 232-3025
GF 232 is a 6.0 mil perforated high performance vinyl film with a white print side and a black see through side coated with a clear low tack repositionable removable solvent acrylic pressure sensitive adhesive designed for exterior/outside mounted one-way view-through window graphics. T
Technical Specification
Applications | This product is designed for production of see through graphics for windows. Open area is approximately 50/50 (50% open) with a hole size of .060 inches (1.5 mm). Recommended for use on flat vertical vehicle windows or commercial store windows. In use this product is applied to the exterior glass surface. This surface must be clean to assure adequate product bond. Do not use solvent or ammonia based glass cleaners for cleaning. When this product is used on vehicles some states have minimum light transmission regulations. The user of this product is responsible for complying with these regulations. |
Thickness | Film: 6.0 mils. Adhesive: .8 to 1.0 mils. Liner: 9.0 mils. (Thickness variance +/- 10%) |
Dimensional Stability | Good. |
Temperature Ranges | Minimum application temperature: +40° F Service temperature range: 0°F to +150°F. |
Expected Exterior Exposure | Up to two (2) years outdoor durability under normal exposure conditions. |
Removablity | Removable up to one (1) year under normal exposure conditions. |
Adhesion | To glass 8 oz/in. When tested according to PSTC-101 Method A with 24 hr. dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production. |
Water Resistance | Excellent |
Humidity Resistance | Excellent |
Solvent Resistance | Good |
Storage Stability | One (1) year shelf life when stored at 70°F and 50% relative humidity. |
Product Codes | 232-3025 30” x 25’ 232-30 30” x 100’ 232-5425 54” x 25’ 232-54 54” x 100’ 232-6025 60” x 25’ 232-60 60” x 100’ |
Recommendations | Completely evaporate ink solvents before application. Failure to do so may facilitate solvent penetration resulting in premature vinyl degradation. |
Additional information
Weight | 20 lbs |
---|---|
Dimensions | 33 × 7 × 7 in |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.