GF 228 TransMark is a 6.0 mil translucent matte white vinyl with a clear removable adhesive on a 90# layflat liner. GF 228 is a premium pressure sensitive vinyl with uniform light diffusion properties used to produce backlit displays for applications such as taxi tops, bus displays, delivery graphics, and other applications that require backlighting. GF 228 is designed to accept a variety of solvent-based, latex and UV curable inks. GF 228 offers excellent bond to substrates such as polycarbonate, styrene, and acrylic sheeting. GF 228 TransMark is CURB Taxi Top Approved.
GF 228-54
GF 228 TransMark is a 6.0 mil translucent matte white vinyl with a clear removable adhesive on a 90# layflat liner
Technical Specification
Applications | Concept® 228 is premium pressure sensitive decal film with uniform light diffusion properties used to produce backlit displays for applications such as taxi tops, backlit bus displays and any other application requiring back lighting. ConceptÒ 228 offers excellent bond to substrates such as polycarbonate, styrene and acrylic sheeting while maintaining easy installation and removal properties. CBS Outdoor and VeriFone taxi top approved displays. |
Thickness | Film: 6.0 mils. Adhesive: .8 to 1.0 mils. Liner: 6.7 mils. (Thickness variance +/- 10%) |
Dimensional Stability | Good. |
Temperature Ranges | Minimum application temperature: +40° F Service temperature range: -40°F to +180°F. |
Expected Exterior Exposure | Removable for up to 1 year. |
Adhesion | To stainless steel 16 oz/in. PSTC-101 Method A with 24 hr. dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production. |
Water Resistance | Excellent |
Humidity Resistance | Excellent |
Solvent Resistance | Excellent |
Storage Stability | One year shelf life when stored at 70°F and 50% relative humidity. |
Percent Light Transmission | Approximately 20% at 550 nm. |
Product Codes | 228-54 (54” X 100’ roll) 228-60 (60” X 100’ roll) |
Recommendations | Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in vinyl degradation. Always thoroughly test this product to confirm it meets your requirements. |
Additional information
Weight | 50 lbs |
---|---|
Dimensions | 57 × 7 × 7 in |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.