Applications | Concept® 252 is designed for temporary application of decals and graphics to most types of painted interior smooth walls. This includes most flat, semi gloss and gloss paint finishes. Decals may also be applied to sealed wall coverings. The surface must be smooth and clean prior to application. Consult with paint manufacturer for correct paint cure time before applying Concept® 252 to freshly painted surfaces. Not designed for coated/sealed/treated stainless steel, brass or bronze surfaces |
Thickness | Fabric: 6.0 mils. Adhesive: 1.3 mils. Liner: 5.3 mils. (Thickness variance +/- 10%) |
Dimensional Stability | Good |
Temperature Ranges | Minimum application temperature: +40° F Service temperature range: -40°F to +200°F. |
Removability | Removable up to 6 months under normal interior exposure conditions and applications. Removal of wall fabric should be done at a 180° angle while pulling slowly against itself. |
Adhesion | To standard test panels 4 to 12 oz. /in. Tested according to PSTC-101 Method A procedures with 24 hour dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Bond to wall surfaces may vary. Test thoroughly before production. |
Storage Stability | 6 months shelf life when stored at 70°F and 50% relative humidity. |
Product Code | Concept® 252-54 54” x 100’ Concept® 252-60 60” x 100’ |
Recommendations | Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in product failure. |
GF 252-60
Technical Specification
Additional information
Weight | 58 lbs |
---|---|
Dimensions | 63 × 7 × 7 in |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.